dmesg - 2012-04-13 18:57
>[ 0.000000] On node 0 totalpages: 458559
[ 0.000000] free_area_init_node: node 0, pgdat c18651c0, node_mem_map f5704200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1800 pages used for memmap
[ 0.000000] HighMem zone: 228522 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 4, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ3 used by override.
[ 0.000000] ACPI: IRQ4 used by override.
[ 0.000000] ACPI: IRQ7 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34176 r0 d23168 u524288
[ 0.000000] pcpu-alloc: s34176 r0 d23168 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454975
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7338496 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0006ffb0)
[ 0.000000] Memory: 1787532k/1834688k available (5811k kernel code, 46704k reserved, 2839k data, 740k init, 921288k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1873000 - 0xc192c000 ( 740 kB)
[ 0.000000] .data : 0xc15accbc - 0xc1872a40 (2839 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15accbc (5811 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:1024 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1200.185 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2400.37 BogoMIPS (lpj=4800740)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004057] Security Framework initialized
[ 0.004086] AppArmor: AppArmor initialized
[ 0.004090] Yama: becoming mindful.
[ 0.004192] Mount-cache hash table entries: 512
[ 0.008152] Initializing cgroup subsys cpuacct
[ 0.008165] Initializing cgroup subsys memory
[ 0.008182] Initializing cgroup subsys devices
[ 0.008187] Initializing cgroup subsys freezer
[ 0.008191] Initializing cgroup subsys blkio
[ 0.008204] Initializing cgroup subsys perf_event
[ 0.008246] mce: CPU supports 0 MCE banks
[ 0.008255] using mwait in idle threads.
[ 0.012290] ACPI: Core revision 20110623
[ 0.020021] ftrace: allocating 26549 entries in 52 pages
[ 0.028091] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.028707] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071162] CPU0: Centaur VIA Nano X2 U4300 @ 1.2+ GHz stepping 0c
[ 0.072003] Performance Events:
[ 0.072003] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.072003] CPU 1 irqstacks, hard=f74b2000 soft=f74b4000
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.160029] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.160062] Brought up 2 CPUs
[ 0.160068] Total of 2 processors activated (4800.47 BogoMIPS).
[ 0.161339] devtmpfs: initialized
[ 0.161339] EVM: security.selinux
[ 0.161339] EVM: security.SMACK64
[ 0.161339] EVM: security.capability
[ 0.161339] PM: Registering ACPI NVS region at 6ffbe000 (204800 bytes)
[ 0.165067] print_constraints: dummy:
[ 0.165122] RTC time: 13:36:15, date: 04/13/12
[ 0.165198] NET: Registered protocol family 16
[ 0.165364] Trying to unpack rootfs image as initramfs...
[ 0.172256] EISA bus registered
[ 0.172288] ACPI: bus type pci registered
[ 0.172427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172435] PCI: not using MMCONFIG
[ 0.172639] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.172714] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.172718] PCI: Using configuration type 1 for base access
[ 0.184892] bio: create slab at 0
[ 0.185099] ACPI: Added _OSI(Module Device)
[ 0.185104] ACPI: Added _OSI(Processor Device)
[ 0.185110] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.185115] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.186878] ACPI: EC: Look up EC in DSDT
[ 0.188964] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.201726] ACPI: Interpreter enabled
[ 0.201745] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.201790] ACPI: Using IOAPIC for interrupt routing
[ 0.201839] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.201899] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.201904] PCI: Using MMCONFIG for extended config space
[ 0.202977] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.219486] ACPI: No dock devices found.
[ 0.219493] HEST: Table not found.
[ 0.219502] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.219812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.220231] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.220238] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.220245] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.220251] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.220258] pci_root PNP0A08:00: host bridge window [mem 0x70000000-0xdfffffff]
[ 0.220264] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.220289] pci 0000:00:00.0: [1106:0410] type 0 class 0x000600
[ 0.220355] pci 0000:00:00.1: [1106:1410] type 0 class 0x000600
[ 0.220413] pci 0000:00:00.2: [1106:2410] type 0 class 0x000600
[ 0.220469] pci 0000:00:00.3: [1106:3410] type 0 class 0x000600
[ 0.220526] pci 0000:00:00.4: [1106:4410] type 0 class 0x000600
[ 0.220583] pci 0000:00:00.5: [1106:5410] type 0 class 0x000600
[ 0.220639] pci 0000:00:00.6: [1106:6410] type 0 class 0x000600
[ 0.220696] pci 0000:00:00.7: [1106:7410] type 0 class 0x000600
[ 0.220755] pci 0000:00:01.0: [1106:7122] type 0 class 0x000300
[ 0.220773] pci 0000:00:01.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.220785] pci 0000:00:01.0: reg 14: [mem 0xfc000000-0xfcffffff]
[ 0.220796] pci 0000:00:01.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.220823] pci 0000:00:01.0: reg 30: [mem 0xfbff0000-0xfbffffff pref]
[ 0.220853] pci 0000:00:01.0: supports D1 D2
[ 0.220873] pci 0000:00:01.1: [1106:9170] type 0 class 0x000403
[ 0.220890] pci 0000:00:01.1: reg 10: [mem 0xfbfec000-0xfbfeffff]
[ 0.220950] pci 0000:00:01.1: supports D1 D2
[ 0.220979] pci 0000:00:03.0: [1106:a410] type 1 class 0x000604
[ 0.221067] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.221076] pci 0000:00:03.0: PME# disabled
[ 0.221106] pci 0000:00:03.1: [1106:b410] type 1 class 0x000604
[ 0.221194] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.221201] pci 0000:00:03.1: PME# disabled
[ 0.221231] pci 0000:00:03.2: [1106:c410] type 1 class 0x000604
[ 0.221318] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.221325] pci 0000:00:03.2: PME# disabled
[ 0.221355] pci 0000:00:03.3: [1106:d410] type 1 class 0x000604
[ 0.221442] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.221449] pci 0000:00:03.3: PME# disabled
[ 0.221479] pci 0000:00:03.4: [1106:e410] type 0 class 0x000600
[ 0.221553] pci 0000:00:0d.0: [1106:9530] type 0 class 0x000501
[ 0.221572] pci 0000:00:0d.0: reg 10: [mem 0xfbfeb800-0xfbfebfff]
[ 0.221585] pci 0000:00:0d.0: reg 14: [io 0xcc00-0xcc07]
[ 0.221646] pci 0000:00:0d.0: supports D1 D2
[ 0.221651] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221658] pci 0000:00:0d.0: PME# disabled
[ 0.221678] pci 0000:00:0f.0: [1106:9001] type 0 class 0x000101
[ 0.221725] pci 0000:00:0f.0: reg 20: [io 0xfc00-0xfc0f]
[ 0.221784] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.221829] pci 0000:00:10.0: reg 20: [io 0xc880-0xc89f]
[ 0.221870] pci 0000:00:10.0: supports D1 D2
[ 0.221875] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221882] pci 0000:00:10.0: PME# disabled
[ 0.221901] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.221946] pci 0000:00:10.1: reg 20: [io 0xc800-0xc81f]
[ 0.221987] pci 0000:00:10.1: supports D1 D2
[ 0.221991] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221998] pci 0000:00:10.1: PME# disabled
[ 0.222017] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.222062] pci 0000:00:10.2: reg 20: [io 0xc480-0xc49f]
[ 0.222103] pci 0000:00:10.2: supports D1 D2
[ 0.222108] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222114] pci 0000:00:10.2: PME# disabled
[ 0.222133] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 0.222178] pci 0000:00:10.3: reg 20: [io 0xc400-0xc41f]
[ 0.222219] pci 0000:00:10.3: supports D1 D2
[ 0.222224] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222231] pci 0000:00:10.3: PME# disabled
[ 0.222252] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.222272] pci 0000:00:10.4: reg 10: [mem 0xfbfeb400-0xfbfeb4ff]
[ 0.222347] pci 0000:00:10.4: supports D1 D2
[ 0.222352] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222359] pci 0000:00:10.4: PME# disabled
[ 0.222384] pci 0000:00:11.0: [1106:8410] type 0 class 0x000601
[ 0.222487] pci 0000:00:11.7: [1106:a353] type 0 class 0x000600
[ 0.222544] pci 0000:00:14.0: [1106:3288] type 0 class 0x000403
[ 0.222563] pci 0000:00:14.0: reg 10: [mem 0xfbfe4000-0xfbfe7fff 64bit]
[ 0.222628] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.222635] pci 0000:00:14.0: PME# disabled
[ 0.222708] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.222766] pci 0000:00:03.1: PCI bridge to [bus 02-02]
[ 0.222823] pci 0000:00:03.2: PCI bridge to [bus 03-04]
[ 0.222830] pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
[ 0.222838] pci 0000:00:03.2: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.222848] pci 0000:00:03.2: bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
[ 0.222914] pci 0000:05:00.0: [1106:3119] type 0 class 0x000200
[ 0.222935] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.222955] pci 0000:05:00.0: reg 14: [mem 0xfebffc00-0xfebffcff 64bit]
[ 0.223048] pci 0000:05:00.0: supports D1 D2
[ 0.223053] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223061] pci 0000:05:00.0: PME# disabled
[ 0.228423] pci 0000:00:03.3: PCI bridge to [bus 05-05]
[ 0.228433] pci 0000:00:03.3: bridge window [io 0xe000-0xefff]
[ 0.228441] pci 0000:00:03.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.228472] pci_bus 0000:00: on NUMA node 0
[ 0.228481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.228761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.228839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
[ 0.228915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
[ 0.228996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
[ 0.229236] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.229433] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.279060] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.279155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.279247] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.279332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.279417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.279503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.279587] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.279672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.279946] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.279971] vgaarb: loaded
[ 0.279975] vgaarb: bridge control possible 0000:00:01.0
[ 0.280227] i2c-core: driver [aat2870] using legacy suspend method
[ 0.280232] i2c-core: driver [aat2870] using legacy resume method
[ 0.280393] SCSI subsystem initialized
[ 0.280513] libata version 3.00 loaded.
[ 0.280629] usbcore: registered new interface driver usbfs
[ 0.280653] usbcore: registered new interface driver hub
[ 0.280720] usbcore: registered new device driver usb
[ 0.280929] PCI: Using ACPI for IRQ routing
[ 0.280959] PCI: pci_cache_line_size set to 64 bytes
[ 0.281113] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.281119] reserve RAM buffer: 000000006ffb0000 - 000000006fffffff
[ 0.281324] NetLabel: Initializing
[ 0.281328] NetLabel: domain hash size = 128
[ 0.281332] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.281354] NetLabel: unlabeled traffic allowed by default
[ 0.282107] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.282116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.282127] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.292214] Switching to clocksource hpet
[ 0.308545] AppArmor: AppArmor Filesystem Enabled
[ 0.308601] pnp: PnP ACPI init
[ 0.308636] ACPI: bus type pnp registered
[ 0.308894] pnp 00:00: [bus 00-ff]
[ 0.308901] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.308907] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.308913] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.308919] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.308925] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.308931] pnp 00:00: [mem 0x70000000-0xdfffffff window]
[ 0.308936] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.309074] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.309129] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.309135] pnp 00:01: [mem 0xfe012000-0xfe012fff]
[ 0.309178] pnp 00:01: disabling [mem 0xfe012000-0xfe012fff] because it overlaps 0000:00:03.2 BAR 14 [mem 0xfe000000-0xfeafffff]
[ 0.309277] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.309285] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.309471] pnp 00:02: [dma 4]
[ 0.309476] pnp 00:02: [io 0x0000-0x000f]
[ 0.309481] pnp 00:02: [io 0x0081-0x0083]
[ 0.309486] pnp 00:02: [io 0x0087]
[ 0.309490] pnp 00:02: [io 0x0089-0x008b]
[ 0.309495] pnp 00:02: [io 0x008f]
[ 0.309499] pnp 00:02: [io 0x00c0-0x00df]
[ 0.309570] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.310269] pnp 00:03: [io 0x0070-0x0071]
[ 0.310342] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310361] pnp 00:04: [io 0x0061]
[ 0.310433] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.310451] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.310469] pnp 00:05: [irq 13]
[ 0.310543] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.310735] pnp 00:06: [io 0x0010-0x001f]
[ 0.310740] pnp 00:06: [io 0x0022-0x003f]
[ 0.310745] pnp 00:06: [io 0x0044-0x005f]
[ 0.310750] pnp 00:06: [io 0x0062-0x0063]
[ 0.310755] pnp 00:06: [io 0x0065-0x0066]
[ 0.310759] pnp 00:06: [io 0x0067-0x0068]
[ 0.310764] pnp 00:06: [io 0x0069-0x006a]
[ 0.310769] pnp 00:06: [io 0x006b-0x006c]
[ 0.310774] pnp 00:06: [io 0x006d-0x006f]
[ 0.310778] pnp 00:06: [io 0x0072-0x007f]
[ 0.310783] pnp 00:06: [io 0x0080]
[ 0.310787] pnp 00:06: [io 0x0084-0x0086]
[ 0.310792] pnp 00:06: [io 0x0088]
[ 0.310797] pnp 00:06: [io 0x008c-0x008e]
[ 0.310801] pnp 00:06: [io 0x0090-0x009f]
[ 0.310806] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.310811] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.310816] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.310820] pnp 00:06: [io 0x0800-0x087f]
[ 0.310825] pnp 00:06: [io 0x0400-0x041f]
[ 0.310831] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.310837] pnp 00:06: [mem 0xfed02000-0xfed02fff]
[ 0.310990] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.310997] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.311003] system 00:06: [io 0x0400-0x041f] has been reserved
[ 0.311011] system 00:06: [mem 0xfed02000-0xfed02fff] has been reserved
[ 0.311019] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311143] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.311149] pnp 00:07: [irq 0 disabled]
[ 0.311160] pnp 00:07: [irq 8]
[ 0.311242] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.311302] pnp 00:08: [io 0x0060]
[ 0.311307] pnp 00:08: [io 0x0064]
[ 0.311317] pnp 00:08: [irq 1]
[ 0.311409] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.311498] pnp 00:09: [irq 12]
[ 0.311591] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.311755] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.311761] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.311769] pnp 00:0a: [mem 0xfed00400-0xfedfffff]
[ 0.311774] pnp 00:0a: [mem 0xfee01000-0xffffffff]
[ 0.311901] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.311908] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.311915] system 00:0a: [mem 0xfed00400-0xfedfffff] could not be reserved
[ 0.311922] system 00:0a: [mem 0xfee01000-0xffffffff] could not be reserved
[ 0.311929] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312168] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.312299] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.312307] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312554] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.312560] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.312565] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.312571] pnp 00:0c: [mem 0x00100000-0x6fffffff]
[ 0.312576] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.312709] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.312716] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.312723] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.312730] system 00:0c: [mem 0x00100000-0x6fffffff] could not be reserved
[ 0.312737] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.312745] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.312994] pnp: PnP ACPI: found 13 devices
[ 0.312998] ACPI: ACPI bus type pnp unregistered
[ 0.313005] PnPBIOS: Disabled by ACPI PNP
[ 0.351137] PCI: max bus depth: 1 pci_try_num: 2
[ 0.351182] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.351198] pci 0000:00:03.1: PCI bridge to [bus 02-02]
[ 0.351213] pci 0000:00:03.2: PCI bridge to [bus 03-04]
[ 0.351220] pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
[ 0.351229] pci 0000:00:03.2: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.351237] pci 0000:00:03.2: bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
[ 0.351248] pci 0000:00:03.3: PCI bridge to [bus 05-05]
[ 0.351254] pci 0000:00:03.3: bridge window [io 0xe000-0xefff]
[ 0.351263] pci 0000:00:03.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.351296] pci 0000:00:03.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.351305] pci 0000:00:03.0: setting latency timer to 64
[ 0.351323] pci 0000:00:03.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31
[ 0.351330] pci 0000:00:03.1: setting latency timer to 64
[ 0.351347] pci 0000:00:03.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35
[ 0.351354] pci 0000:00:03.2: setting latency timer to 64
[ 0.351371] pci 0000:00:03.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39
[ 0.351378] pci 0000:00:03.3: setting latency timer to 64
[ 0.351386] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.351392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.351398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.351403] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.351409] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
[ 0.351415] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.351422] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.351427] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfeafffff]
[ 0.351434] pci_bus 0000:03: resource 2 [mem 0xf8000000-0xfaffffff 64bit pref]
[ 0.351440] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.351445] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.351517] NET: Registered protocol family 2
[ 0.351639] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.352107] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.352963] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.353385] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.353391] TCP reno registered
[ 0.353398] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.353416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.353575] NET: Registered protocol family 1
[ 0.353627] pci 0000:00:01.0: Boot video device
[ 0.353638] pci 0000:00:03.0: disabling DAC on VIA PCI bridge
[ 0.353766] PCI: CLS 32 bytes, default 64
[ 0.354268] audit: initializing netlink socket (disabled)
[ 0.354284] type=2000 audit(1334324174.348:1): initialized
[ 0.415998] highmem bounce pool size: 64 pages
[ 0.416021] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.439318] VFS: Disk quotas dquot_6.5.2
[ 0.439457] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.440674] fuse init (API version 7.17)
[ 0.440881] msgmni has been set to 1691
[ 0.441537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.441597] io scheduler noop registered
[ 0.441602] io scheduler deadline registered
[ 0.441619] io scheduler cfq registered (default)
[ 0.441898] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.441977] pcieport 0000:00:03.0: irq 64 for MSI/MSI-X
[ 0.442148] pcieport 0000:00:03.1: setting latency timer to 64
[ 0.442208] pcieport 0000:00:03.1: irq 65 for MSI/MSI-X
[ 0.442376] pcieport 0000:00:03.2: setting latency timer to 64
[ 0.442435] pcieport 0000:00:03.2: irq 66 for MSI/MSI-X
[ 0.442635] pcieport 0000:00:03.3: setting latency timer to 64
[ 0.442693] pcieport 0000:00:03.3: irq 67 for MSI/MSI-X
[ 0.442905] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.442955] aer 0000:00:03.1:pcie02: service driver aer loaded
[ 0.443005] aer 0000:00:03.2:pcie02: service driver aer loaded
[ 0.443057] aer 0000:00:03.3:pcie02: service driver aer loaded
[ 0.443092] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.443100] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.443116] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 0.443124] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 0.443140] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
[ 0.443148] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
[ 0.443164] pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt
[ 0.443169] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.443177] pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded
[ 0.443217] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.443300] pciehp 0000:00:03.2:pcie04: HPC vendor_id 1106 device_id c410 ss_vid 1106 ss_did c410
[ 0.443337] pciehp 0000:00:03.2:pcie04: service driver pciehp loaded
[ 0.443352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.443627] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.443736] ACPI: AC Adapter [ACDP] (on-line)
[ 0.443985] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.443997] ACPI: Sleep Button [SLPB]
[ 0.444122] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.444130] ACPI: Power Button [PWRB]
[ 0.444222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.444230] ACPI: Power Button [PWRF]
[ 0.444526] Marking TSC unstable due to TSC halts in idle
[ 0.444543] ACPI: acpi_idle registered with cpuidle
[ 0.447154] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.447177] ACPI: Battery Slot [BAT0] (battery present)
[ 0.447268] ERST: Table is not found!
[ 0.447273] GHES: HEST is not enabled!
[ 0.447831] ACPI: Battery Slot [BAT0] (battery present)
[ 0.447862] isapnp: Scanning for PnP cards...
[ 0.802041] isapnp: No Plug & Play device found
[ 0.931365] Freeing initrd memory: 13784k freed
[ 1.028780] Linux agpgart interface v0.103
[ 1.031912] brd: module loaded
[ 1.033519] loop: module loaded
[ 1.034718] Fixed MDIO Bus: probed
[ 1.034761] tun: Universal TUN/TAP device driver, 1.6
[ 1.034765] tun: (C) 1999-2004 Max Krasnyansky
[ 1.034851] PPP generic driver version 2.4.2
[ 1.035043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.035102] ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.035124] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.035211] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.035243] ehci_hcd 0000:00:10.4: debug port 1
[ 1.035279] ehci_hcd 0000:00:10.4: irq 23, io mem 0xfbfeb400
[ 1.044021] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.044296] hub 1-0:1.0: USB hub found
[ 1.044306] hub 1-0:1.0: 8 ports detected
[ 1.044469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.044499] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.044551] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.044562] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.044650] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.044696] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c880
[ 1.044948] hub 2-0:1.0: USB hub found
[ 1.044957] hub 2-0:1.0: 2 ports detected
[ 1.045105] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.045119] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.045202] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.045244] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 1.045498] hub 3-0:1.0: USB hub found
[ 1.045506] hub 3-0:1.0: 2 ports detected
[ 1.045661] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.045672] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.045757] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.045799] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c480
[ 1.046040] hub 4-0:1.0: USB hub found
[ 1.046048] hub 4-0:1.0: 2 ports detected
[ 1.046179] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.046189] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.046272] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.046298] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000c400
[ 1.046538] hub 5-0:1.0: USB hub found
[ 1.046546] hub 5-0:1.0: 2 ports detected
[ 1.046794] usbcore: registered new interface driver libusual
[ 1.046893] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.047382] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.047400] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.047736] mousedev: PS/2 mouse device common for all mice
[ 1.048136] rtc_cmos 00:03: RTC can wake from S4
[ 1.048359] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.048400] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.048543] device-mapper: uevent: version 1.0.3
[ 1.048719] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.048810] EISA: Probing bus 0 at eisa.0
[ 1.048815] EISA: Cannot allocate resource for mainboard
[ 1.048820] Cannot allocate resource for EISA slot 1
[ 1.048824] Cannot allocate resource for EISA slot 2
[ 1.048828] Cannot allocate resource for EISA slot 3
[ 1.048833] Cannot allocate resource for EISA slot 4
[ 1.048837] Cannot allocate resource for EISA slot 5
[ 1.048841] Cannot allocate resource for EISA slot 6
[ 1.048845] Cannot allocate resource for EISA slot 7
[ 1.048849] Cannot allocate resource for EISA slot 8
[ 1.048853] EISA: Detected 0 cards.
[ 1.048872] cpufreq-nforce2: No nForce2 chipset.
[ 1.048945] cpuidle: using governor ladder
[ 1.049055] cpuidle: using governor menu
[ 1.049059] EFI Variables Facility v0.08 2004-May-17
[ 1.049581] TCP cubic registered
[ 1.049850] NET: Registered protocol family 10
[ 1.050959] NET: Registered protocol family 17
[ 1.051004] Registering the dns_resolver key type
[ 1.051047] Using IPI No-Shortcut mode
[ 1.051277] PM: Hibernation image not present or could not be loaded.
[ 1.051300] registered taskstats version 1
[ 1.075221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.076926] Magic number: 8:921:634
[ 1.077113] rtc_cmos 00:03: setting system clock to 2012-04-13 13:36:16 UTC (1334324176)
[ 1.077149] longhaul: More than 1 CPU detected, longhaul disabled.
[ 1.077157] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.077160] EDD information not available.
[ 1.077519] Freeing unused kernel memory: 740k freed
[ 1.078038] Write protecting the kernel text: 5812k
[ 1.078208] Write protecting the kernel read-only data: 2372k
[ 1.078212] NX-protecting the kernel data: 4428k
[ 1.124802] udevd[85]: starting version 175
[ 1.298247] via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.
[ 1.298294] via_sdmmc: VIA SDMMC controller found at 0000:00:0d.0 [1106:9530] (rev 61)
[ 1.298318] via_sdmmc 0000:00:0d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.302727] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.15
[ 1.302734] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[ 1.302738] Copyright (c) 2004 Red Hat Inc.
[ 1.302782] via-velocity 0000:05:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 1.302792] via-velocity 0000:05:00.0: setting latency timer to 64
[ 1.305211] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
[ 1.305219] eth0: Ethernet Address: 00:86:07:ac:60:13
[ 1.305240] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 1.320124] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 1.337364] pata_via 0000:00:0f.0: version 0.3.4
[ 1.338297] scsi0 : pata_via
[ 1.338513] scsi1 : pata_via
[ 1.341028] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.341034] ata2: DUMMY
[ 1.553733] ata1.01: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.553742] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.553754] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 1.620363] ata1.01: configured for UDMA/33
[ 1.620606] scsi 0:0:1:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 1.620919] sd 0:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.620967] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.620998] sd 0:0:1:0: [sda] Write Protect is off
[ 1.621005] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.621039] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.732138] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[ 1.733269] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.441492] EXT3-fs (sda8): recovery required on readonly filesystem
[ 2.441500] EXT3-fs (sda8): write access will be enabled during recovery
[ 2.883614] kjournald starting. Commit interval 5 seconds
[ 2.883709] EXT3-fs (sda8): recovery complete
[ 2.884047] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 15.977022] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.014138] udevd[322]: starting version 175
[ 16.045259] Adding 1998844k swap on /dev/sda1. Priority:-1 extents:1 across:1998844k
[ 16.086835] lp: driver loaded but no devices found
[ 16.260221] EXT3-fs (sda8): using internal journal
[ 16.492723] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 16.493058] acpi device:09: registered as cooling_device2
[ 16.493223] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 16.499353] ACPI: Video Device [VUMA] (multi-head: yes rom: no post: no)
[ 16.629119] type=1400 audit(1334324192.047:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=539 comm="apparmor_parser"
[ 16.632293] type=1400 audit(1334324192.051:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser"
[ 16.632993] type=1400 audit(1334324192.051:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
[ 16.658925] Bluetooth: Core ver 2.16
[ 16.659029] NET: Registered protocol family 31
[ 16.659034] Bluetooth: HCI device and connection manager initialized
[ 16.659041] Bluetooth: HCI socket layer initialized
[ 16.659046] Bluetooth: L2CAP socket layer initialized
[ 16.659059] Bluetooth: SCO socket layer initialized
[ 16.675603] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.675612] Bluetooth: BNEP filters: protocol multicast
[ 16.732069] Bluetooth: RFCOMM TTY layer initialized
[ 16.732096] Bluetooth: RFCOMM socket layer initialized
[ 16.732101] Bluetooth: RFCOMM ver 1.11
[ 16.985425] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.000056] via-velocity 0000:05:00.0: BAR 0: set to [io 0xe800-0xe8ff] (PCI address [0xe800-0xe8ff])
[ 17.000075] via-velocity 0000:05:00.0: BAR 1: set to [mem 0xfebffc00-0xfebffcff 64bit] (PCI address [0xfebffc00-0xfebffcff])
[ 17.000102] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.016047] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.016833] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.036125] via-velocity 0000:05:00.0: BAR 0: set to [io 0xe800-0xe8ff] (PCI address [0xe800-0xe8ff])
[ 17.036143] via-velocity 0000:05:00.0: BAR 1: set to [mem 0xfebffc00-0xfebffcff 64bit] (PCI address [0xfebffc00-0xfebffcff])
[ 17.036174] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.052050] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.053261] do_IRQ: 0.116 No irq handler for vector (irq -1)
[ 17.068060] via-velocity 0000:05:00.0: BAR 0: set to [io 0xe800-0xe8ff] (PCI address [0xe800-0xe8ff])
[ 17.068077] via-velocity 0000:05:00.0: BAR 1: set to [mem 0xfebffc00-0xfebffcff 64bit] (PCI address [0xfebffc00-0xfebffcff])
[ 17.100057] via-velocity 0000:05:00.0: BAR 0: set to [io 0xe800-0xe8ff] (PCI address [0xe800-0xe8ff])
[ 17.100075] via-velocity 0000:05:00.0: BAR 1: set to [mem 0xfebffc00-0xfebffcff 64bit] (PCI address [0xfebffc00-0xfebffcff])
[ 17.113668] Velocity is AUTO mode
[ 17.259720] snd_hda_intel 0000:00:14.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.259798] snd_hda_intel 0000:00:14.0: irq 68 for MSI/MSI-X
[ 17.259839] snd_hda_intel 0000:00:14.0: setting latency timer to 64
[ 17.259847] snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
[ 17.290794] init: failsafe main process (639) killed by TERM signal
[ 17.346212] input: HDA VIA VT82xx Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input5
[ 17.346522] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:14.0/sound/card0/input6
[ 17.616323] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 18.479862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 18.479870] vesafb: scrolling: redraw
[ 18.479877] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 18.481671] vesafb: framebuffer at 0xd0000000, mapped to 0xf8b00000, using 5120k, total 5120k
[ 18.483300] Console: switching to colour frame buffer device 160x64
[ 18.483385] fb0: VESA VGA frame buffer device
[ 18.519755] ppdev: user-space parallel port driver
[ 18.677510] eth0: Link auto-negotiation speed 100M bps full duplex
[ 19.238402] [drm] Initialized drm 1.1.0 20060810
[ 19.257000] via_chrome9 0000:00:01.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 19.263018] via_chrome9_setup_mmio mmio_map_base : 0xf9088000.
[ 19.269551] [TTM] Zone kernel: Available graphics memory: 440384 kiB.
[ 19.269559] [TTM] Zone highmem: Available graphics memory: 901028 kiB.
[ 19.269564] [TTM] Initializing pool allocator.
[ 19.269591] via_chrome9_driver_irq_preinstall
[ 19.269595] S3InitInterruptDevices S3InitInterruptDevices
[ 19.269602] via_chrome9_hpd_irq_process ************ mm_200 = 0xa, mm_1280 = 0x5000000 ************
[ 19.269609] via_chrome9_hpd_irq_process ############ mm_200 = 0xa, mm_1280 = 0x5000000 ############
[ 19.269648] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.269652] [drm] No driver support for vblank timestamp query.
[ 19.269657] via_chrome9_init_irq KMS:irq initialized ok.
[ 19.394210] via_chrome9_get_chipset_revision The chipset revision is 41003
[ 19.395571] via_chrome9_i2c_create via i2c bit bus 0x3d
[ 19.396332] via_chrome9_i2c_create via i2c bit bus 0x2c
[ 19.397026] S3InitCbios CBIOS_INIT: Sr39 0x40
[ 19.397032] S3InitCbios CBIOS_INIT: FrameBufferSize: 0x10000000
[ 19.397037] S3InitCbios CBIOS_INIT: vram_start: 0xd0000000
[ 19.397042] S3InitCbios CBIOS_INIT: RomImagePhysicalAddr 0xdffe0000
[ 19.397047] S3InitCbios CBIOS_INIT: RomImage 0xf88c0000
[ 19.397051] S3InitCbios CBIOS_INIT: RomImage length: 0x2e
[ 19.397062] S3InitCbios CBIOS_INIT: SysBIOSInfo is Valid!
[ 19.397066] S3InitCbios CBIOS_INIT: Version =0x10
[ 19.397071] S3InitCbios CBIOS_INIT: BootUpDev =0x1
[ 19.397076] S3InitCbios CBIOS_INIT: HDTV_TV_Config =0x4040100
[ 19.397081] S3InitCbios CBIOS_INIT: FBStartingAddr =0x70000000
[ 19.397085] S3InitCbios CBIOS_INIT: LCDPanelID =0x2
[ 19.397090] S3InitCbios CBIOS_INIT: FBSize =0x8
[ 19.397094] S3InitCbios CBIOS_INIT: DRAMDataRateIdx =0xa0
[ 19.397099] S3InitCbios CBIOS_INIT: DualMemoCtrl =0x0
[ 19.397103] S3InitCbios CBIOS_INIT: AlwaysLightOnDev =0x0
[ 19.397108] S3InitCbios CBIOS_INIT: AlwaysLightOnDevMask=0x0
[ 19.397113] S3InitCbios CBIOS_INIT: EngineClockModify =0xc0001900
[ 19.397117] S3InitCbios CBIOS_INIT: LCD2PanelID =0x2
[ 19.397122] S3InitCbios CBIOS_INIT: TVLayOut =0x0
[ 19.397126] S3InitCbios CBIOS_INIT: SSCCtrl =0x13
[ 19.397131] S3InitCbios CBIOS_INIT: ChipCapability =0x0
[ 19.397136] S3InitCbios CBIOS_INIT: LowTopAddress =0x8000
[ 19.397140] S3InitCbios CBIOS_INIT: RemapStartAddress =0x0
[ 19.398094] S3CBIOS: System info: BootUpDev = 0x1
[ 19.398099] S3CBIOS: System info: HDTV_TV_Config = 0x4040100
[ 19.398105] S3CBIOS: System info: FBStartingAddr = 0x70000000
[ 19.398110] S3CBIOS: System info: LCDPanelID = 0x2
[ 19.398115] S3CBIOS: System info: FBSize = 0x8
[ 19.398119] S3CBIOS: System info: DRAMDataRateIdx = 0xA0
[ 19.398124] S3CBIOS: System info: DualMemoCtrl = 0x0
[ 19.398129] S3CBIOS: System info: EngineClockModify = 0xC0001900
[ 19.398134] S3CBIOS: System info: LCD2PanelID = 0x2
[ 19.398139] S3CBIOS: System info: TVlayout = 0x0
[ 19.398143] S3CBIOS: System info: SSCCtrl = 0x13
[ 19.398148] S3CBIOS: System info: ChipCapability = 0x0
[ 19.398153] S3CBIOS: System info: LowTopAddress = 0x8000
[ 19.398158] S3CBIOS: System info: RemapStartAddress = 0x0
[ 19.398163] S3CBIOS: System info: FSBSpeed = 0x42A
[ 19.401051] S3CBIOS: EDID read error or Can not parse EDID2.0 !
[ 19.401062] S3InitCbios CBIOS_INIT: CBIOS is Initialized!
[ 19.404898] via_chrome9_mode_set_init CBIOS supported
[ 19.404906] S3BiosQueryVBEInfo S3: Video Bios Version dword: 0x95400621
[ 19.404912] S3BiosQueryVBEInfo S3: Bios Device Support byte: 0x00018223.
[ 19.404918] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 19.404927] via_chrome9_mode_set_init CBIOS init, device 0x1 init as power off.
[ 19.404932] S3CbiosSetDisplayDevicePowerState Device: 0x2, screenState: 0x4
[ 19.404939] via_chrome9_mode_set_init CBIOS init, device 0x2 init as power off.
[ 19.404944] S3CbiosSetDisplayDevicePowerState Device: 0x20, screenState: 0x4
[ 19.404950] S3CBIOS: error digital port type!
[ 19.425815] via_chrome9_mode_set_init CBIOS init, device 0x20 init as power off.
[ 19.425821] S3CbiosSetDisplayDevicePowerState Device: 0x200, screenState: 0x4
[ 19.425827] S3CBIOS: error digital port type!
[ 19.446690] via_chrome9_mode_set_init CBIOS init, device 0x200 init as power off.
[ 19.446696] S3CbiosSetDisplayDevicePowerState Device: 0x8000, screenState: 0x4
[ 19.467558] via_chrome9_mode_set_init CBIOS init, device 0x8000 init as power off.
[ 19.467565] via_chrome9_internal_encoder_init i=0 encoder_type=2 name=DAC
[ 19.468411] via_chrome9_internal_encoder_init i=1 encoder_type=400 name=DAC
[ 19.469975] via_chrome9_internal_encoder_init i=2 encoder_type=4 name=LVDS
[ 19.470774] enter via_chrome9_fb_cmd_parse
[ 19.471524] via_chrome9_internal_encoder_init i=3 encoder_type=80 name=HDMI
[ 19.472349] via_chrome9_borders_property_attach
[ 19.472430] via_chrome9_internal_encoder_init i=4 encoder_type=800 name=HDMI
[ 19.472453] via_chrome9_borders_property_attach
[ 19.472531] via_chrome9_internal_encoder_init i=5 encoder_type=10 name=DP_1
[ 19.472588] via_chrome9_internal_encoder_init i=6 encoder_type=20 name=DP_2
[ 19.472649] via_chrome9_internal_encoder_init i=7 encoder_type=8 name=TMDS
[ 19.472708] via_chrome9_internal_encoder_init i=8 encoder_type=100 name=LVDS
[ 19.472717] enter via_chrome9_fb_cmd_parse
[ 19.472771] via_chrome9_internal_encoder_init i=a encoder_type=200 name=TMDS
[ 19.472831] via_chrome9_attach_encoder_connector attach connector id =2 encoder id =2
[ 19.472836] via_chrome9_attach_encoder_connector attach connector id =400 encoder id =400
[ 19.472843] via_chrome9_attach_encoder_connector attach connector id =4 encoder id =4
[ 19.472848] via_chrome9_attach_encoder_connector attach connector id =80 encoder id =80
[ 19.472854] via_chrome9_attach_encoder_connector attach connector id =800 encoder id =800
[ 19.472860] via_chrome9_attach_encoder_connector attach connector id =10 encoder id =10
[ 19.472866] via_chrome9_attach_encoder_connector attach connector id =20 encoder id =20
[ 19.472871] via_chrome9_attach_encoder_connector attach connector id =8 encoder id =8
[ 19.472877] via_chrome9_attach_encoder_connector attach connector id =100 encoder id =100
[ 19.472883] via_chrome9_attach_encoder_connector attach connector id =200 encoder id =200
[ 19.472889] via_chrome9_hpd_init HOTPLUG ENABLED.
[ 19.472893] S3InitInterruptDevices S3InitInterruptDevices
[ 19.472897] S3InitHDMI enter
[ 19.472903] S3InitDP enter
[ 19.472908] S3InitDP2 enter
[ 19.472912] S3InitDVI enter
[ 19.472916] via_chrome9_hpd_init hpd initialized.
[ 19.472935] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 19.472944] S3CBiosSetIgaScreenOnOffState Iga 1 screen on/off state: 0x0!!!!
[ 19.473259] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 19.473280] via_chrome9_device_detect device 0x1 detect: 1 !
[ 19.473297] via_vga_get_modes
[ 19.501319] via_chrome9_connector_get_edid device 0x1 EDID successful get.
[ 19.501522] via_vga_mode_valid mode is not valid
[ 19.501527] via_vga_mode_valid mode is not valid
[ 19.501553] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 19.501559] via_chrome9_device_detect device 0x40 detect: 0 !
[ 19.501565] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 19.501571] via_chrome9_device_detect device 0x2 detect: 1 !
[ 19.501575] via_chrome9_lcd_get_modes
[ 19.503440] S3CBIOS: EDID read error or Can not parse EDID2.0 !
[ 19.503446] via_chrome9_connector_get_edid device 0x2 EDID get fail. construct fake edid.
[ 19.503452] ConstructFakeEDIDInfo fake edid for device 0x2
[ 19.503466] composite sync not supported
[ 19.503479] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 19.503484] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 19.503490] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 19.503495] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 19.508654] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 19.508659] via_chrome9_device_detect device 0x200 detect: 0 !
[ 19.508666] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 19.508671] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 19.514705] S3CBIOS: DP device HPD : 0
[ 19.514711] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 19.514716] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 19.514722] S3CBIOS: DP2 device HPD : 0
[ 19.514728] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 19.514733] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 19.520775] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 19.520780] via_chrome9_device_detect device 0x20 detect: 0 !
[ 19.520786] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 19.520792] via_chrome9_device_detect device 0x100 detect: 0 !
[ 19.520798] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 19.520803] via_chrome9_device_detect device 0x10 detect: 0 !
[ 19.558706] via_chrome9_fb_create fb width=1280 height=1024
[ 19.558712] via_chrome9_fb_create fb start=0xd00c1000 length=0x500000
[ 19.558723] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 19.558728] fb: conflicting fb hw usage viachrome9fb vs VESA VGA - removing generic driver
[ 19.558854] Console: switching to colour dummy device 80x25
[ 19.559102] fbcon: viachrome9fb (fb0) is primary device
[ 19.559306] Console: switching to colour frame buffer device 128x48
[ 19.559319] fb0: viachrome9fb frame buffer device
[ 19.559323] drm: registered panic notifier
[ 19.559335] [drm] Initialized via_chrome9 1.1.0 20091016 for 0000:00:01.0 on minor 0
[ 19.577600] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 19.577609] via_chrome9_device_detect device 0x1 detect: 1 !
[ 19.577616] via_vga_get_modes
[ 19.577844] via_vga_mode_valid mode is not valid
[ 19.577848] via_vga_mode_valid mode is not valid
[ 19.578532] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 19.578539] via_chrome9_device_detect device 0x1 detect: 1 !
[ 19.578544] via_vga_get_modes
[ 19.578735] via_vga_mode_valid mode is not valid
[ 19.578739] via_vga_mode_valid mode is not valid
[ 19.578819] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 19.578824] via_chrome9_device_detect device 0x40 detect: 0 !
[ 19.578833] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 19.578839] via_chrome9_device_detect device 0x40 detect: 0 !
[ 19.579048] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 19.579054] via_chrome9_device_detect device 0x2 detect: 1 !
[ 19.579060] via_chrome9_lcd_get_modes
[ 19.579068] composite sync not supported
[ 19.579083] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 19.579089] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 19.579095] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 19.579100] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 19.585357] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 19.585363] via_chrome9_device_detect device 0x200 detect: 0 !
[ 19.593657] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 19.593664] via_chrome9_device_detect device 0x200 detect: 0 !
[ 19.593678] via_chrome9_set_hdmi_xorg_options
[ 19.593683] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 19.593891] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 19.593898] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 19.593907] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 19.593912] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 19.600160] S3CBIOS: DP device HPD : 0
[ 19.600167] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 19.600173] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 19.607212] S3CBIOS: DP device HPD : 0
[ 19.607220] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 19.607226] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 19.607434] S3CBIOS: DP2 device HPD : 0
[ 19.607441] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 19.607447] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 19.607455] S3CBIOS: DP2 device HPD : 0
[ 19.607461] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 19.607466] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 19.613707] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 19.613714] via_chrome9_device_detect device 0x20 detect: 0 !
[ 19.620814] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 19.620821] via_chrome9_device_detect device 0x20 detect: 0 !
[ 19.621058] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 19.621064] via_chrome9_device_detect device 0x100 detect: 0 !
[ 19.621074] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 19.621079] via_chrome9_device_detect device 0x100 detect: 0 !
[ 19.621269] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 19.621275] via_chrome9_device_detect device 0x10 detect: 0 !
[ 19.621284] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 19.621289] via_chrome9_device_detect device 0x10 detect: 0 !
[ 19.627443] via_vga_mode_valid mode is not valid
[ 19.627451] via_vga_mode_valid mode is not valid
[ 19.701567] S3GetChildDescriptorByDevice device 0x1 EDID successful get.
[ 19.701934] S3ConstructDeviceModeTable mode 1280x1024 add!
[ 19.701962] S3ConstructDeviceModeTable mode 640x480 add!
[ 19.701982] S3ConstructDeviceModeTable mode 800x480 add!
[ 19.701993] S3ConstructDeviceModeTable mode 800x600 add!
[ 19.702010] S3ConstructDeviceModeTable mode 1024x576 add!
[ 19.702024] S3ConstructDeviceModeTable mode 1024x600 add!
[ 19.702033] S3ConstructDeviceModeTable mode 1024x768 add!
[ 19.702050] S3ConstructDeviceModeTable mode 1152x864 add!
[ 19.702066] S3ConstructDeviceModeTable mode 1280x720 add!
[ 19.702080] S3ConstructDeviceModeTable mode 1280x768 add!
[ 19.702096] S3ConstructDeviceModeTable mode 1280x800 add!
[ 19.702109] S3ConstructDeviceModeTable mode 1280x960 add!
[ 19.702120] S3ConstructDeviceModeTable mode 1360x768 add!
[ 19.702133] S3ConstructDeviceModeTable mode 1366x768 add!
[ 19.702144] S3ConstructDeviceModeTable mode 1368x768 add!
[ 19.702155] S3ConstructDeviceModeTable mode 1400x1050 add!
[ 19.702167] S3ConstructDeviceModeTable mode 1440x900 add!
[ 19.702178] S3ConstructDeviceModeTable mode 1600x900 add!
[ 19.702187] S3ConstructDeviceModeTable mode 1600x1200 add!
[ 19.702202] S3ConstructDeviceModeTable mode 1680x1050 add!
[ 19.702214] S3ConstructDeviceModeTable mode 1920x1080 add!
[ 19.702232] S3ConstructDeviceModeTable mode 1920x1200 add!
[ 19.702243] S3ConstructDeviceModeTable mode 1920x1440 add!
[ 19.702254] S3ConstructDeviceModeTable mode 2048x1536 add!
[ 19.702265] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 640x480@6000 is Est timing.
[ 19.702273] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 640x480@7200 is Est timing.
[ 19.702280] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 640x480@7500 is Est timing.
[ 19.702287] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 640x480@8500 is Std timing.
[ 19.702294] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 800x600@6000 is Est timing.
[ 19.702301] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 800x600@7200 is Est timing.
[ 19.702308] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 800x600@7500 is Est timing.
[ 19.702315] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 800x600@8500 is Std timing.
[ 19.702324] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1024x768@6000 is Est timing.
[ 19.702331] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1024x768@7000 is Est timing.
[ 19.702338] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1024x768@7500 is Est timing.
[ 19.702345] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1024x768@8500 is Std timing.
[ 19.702356] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1280x1024@7500 is Est timing.
[ 19.702363] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1280x1024@8500 is Std timing.
[ 19.702370] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1280x1024@8502 is Dtl timing.
[ 19.702381] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x1 mode 1600x1200@7500 is Std timing.
[ 19.702393] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 19.702403] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 19.702412] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 19.702420] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 19.702431] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 19.702439] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 19.702445] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 19.702455] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 19.702468] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 19.702476] S3CbiosSetMode
[ 19.702477] ===========mode set info start=====================
[ 19.702483] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 19.702489] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 19.702494] S3CbiosSetMode ===========mode set info end=====================
[ 19.702497]
[ 19.702501] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 19.702517] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 19.702629] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 19.702634] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 19.702639] via_chrome9_crtc_do_set_base
[ 19.702644] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 19.702654] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[ 19.702663] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 19.702668] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 19.702675] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 19.702732] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 19.702737] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 19.702743] S3CBIOS: Not error, CRT no Pad just return
[ 19.702758] S3CBiosSetIgaScreenOnOffState Iga 1 screen on/off state: 0x0!!!!
[ 20.689799] S3CBIOS: DP device HPD : 0
[ 20.689810] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 20.689817] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 20.689871] S3CBIOS: DP2 device HPD : 0
[ 20.689878] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 20.689883] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 20.696017] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 20.696024] via_chrome9_device_detect device 0x20 detect: 0 !
[ 20.696579] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 20.696586] via_chrome9_device_detect device 0x10 detect: 0 !
[ 20.703114] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 20.703121] via_chrome9_device_detect device 0x200 detect: 0 !
[ 20.703188] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 20.703195] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 20.703234] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 20.703240] via_chrome9_device_detect device 0x2 detect: 1 !
[ 20.703278] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 20.703283] via_chrome9_device_detect device 0x100 detect: 0 !
[ 20.703618] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 20.703624] via_chrome9_device_detect device 0x1 detect: 1 !
[ 20.703662] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 20.703668] via_chrome9_device_detect device 0x40 detect: 0 !
[ 20.997857] via_vga_mode_valid mode is not valid
[ 20.997867] via_vga_mode_valid mode is not valid
[ 23.615379] via_vga_mode_valid mode is not valid
[ 23.615389] via_vga_mode_valid mode is not valid
[ 27.336018] eth0: no IPv6 routers present
[ 29.574087] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 29.574096] via_chrome9_device_detect device 0x200 detect: 0 !
[ 29.574105] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 29.574111] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 29.580160] S3CBIOS: DP device HPD : 0
[ 29.580167] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 29.580172] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 29.580178] S3CBIOS: DP2 device HPD : 0
[ 29.580184] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 29.580190] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 29.586225] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 29.586230] via_chrome9_device_detect device 0x20 detect: 0 !
[ 141.491361] via_vga_mode_valid mode is not valid
[ 141.491371] via_vga_mode_valid mode is not valid
[ 142.427727] via_vga_mode_valid mode is not valid
[ 142.427737] via_vga_mode_valid mode is not valid
[ 142.616277] via_vga_mode_valid mode is not valid
[ 142.616287] via_vga_mode_valid mode is not valid
[ 157.855042] audit_printk_skb: 60 callbacks suppressed
[ 157.855050] type=1400 audit(1334324333.271:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1902 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 162.571797] via_vga_mode_valid mode is not valid
[ 162.571807] via_vga_mode_valid mode is not valid
[ 537.483779] kjournald starting. Commit interval 5 seconds
[ 537.484064] EXT3-fs (sda2): using internal journal
[ 537.484077] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 3660.201684] via_vga_mode_valid mode is not valid
[ 3660.201697] via_vga_mode_valid mode is not valid
[ 3690.420250] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 3690.420259] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 3690.420273] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 3729.886188] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 3729.886253] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 3729.886260] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 3729.886267] S3CBIOS: Not error, CRT no Pad just return
[ 4090.089810] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x003c)
[ 4090.089820] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0046)
[ 4090.089829] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x004b)
[ 4090.089837] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[ 4090.089844] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[ 4090.089854] S3CBIOS_mode_fixup Device:0x1 souce:1280x1024@8500 interlace:0, target:1280x1024@8500 interlace:0
[ 4090.089861] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4090.089865] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4090.089877] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4090.089891] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4090.089898] S3CbiosSetMode
[ 4090.089900] ===========mode set info start=====================
[ 4090.089905] S3CbiosSetMode iga: 0 Source Mode=1280x1024 32bpp
[ 4090.089910] S3CbiosSetMode device: 0x1 target Mode=1280x1024 @8500 , Interlaced: 0
[ 4090.089914] S3CbiosSetMode ===========mode set info end=====================
[ 4090.089917]
[ 4090.089920] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.089941] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.090065] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4090.090070] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4090.090074] via_chrome9_crtc_do_set_base
[ 4090.090079] via_chrome9_crtc_do_set_base width=1280 height=1024 pitch=5120 bits_per_pixel=32 depth=24
[ 4090.090087] via_chrome9_crtc_do_set_base gpu_addr=c1000 , x=0 , y=0
[ 4090.090094] via_chrome9_crtc_do_set_base mode hdisplay = 1280, mode vdisplay = 1024
[ 4090.090099] via_chrome9_crtc_do_set_base offset = 640, fetchcount=321, pixelformat=32
[ 4090.090105] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4090.090159] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4090.090163] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4090.090167] S3CBIOS: Not error, CRT no Pad just return
[ 4090.090181] S3CBiosSetIgaScreenOnOffState Iga 1 screen on/off state: 0x0!!!!
[ 4090.092095] S3CBIOS: EDID read error or Can not parse EDID2.0 !
[ 4090.092101] S3GetChildDescriptorByDevice device 0x2 EDID get fail. construct fake edid.
[ 4090.092106] ConstructFakeEDIDInfo fake edid for device 0x2
[ 4090.092213] S3ConstructDeviceModeTable mode 640x480 add!
[ 4090.092222] S3ConstructDeviceModeTable mode 800x480 add!
[ 4090.092228] S3ConstructDeviceModeTable mode 800x600 add!
[ 4090.092234] S3ConstructDeviceModeTable mode 1024x576 add!
[ 4090.092240] S3ConstructDeviceModeTable mode 1024x600 add!
[ 4090.092246] S3ConstructDeviceModeTable mode 1024x768 add!
[ 4090.092255] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x2 mode 640x480@6000 is Est timing.
[ 4090.092261] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x2 mode 800x600@6000 is Est timing.
[ 4090.092269] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x2 mode 1024x768@6000 is Est timing.
[ 4090.092275] S3AddCEATimingFlagInModeTable Mode Flag, Device : 0x2 mode 1024x768@6000 is Dtl timing.
[ 4090.092285] S3CBIOS_mode_fixup Device:0x2 souce:1024x768@5900 interlace:0, target:1024x768@6000 interlace:0
[ 4090.092291] via_chrome9_device_dpms DisplayDevice 0x2 dpms mode is 0x3.
[ 4090.092295] S3CbiosSetDisplayDevicePowerState Device: 0x2, screenState: 0x4
[ 4090.092302] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x1, IGA1: 0x0, IGA2: 0x2
[ 4090.092313] S3CBiosSetIgaScreenOnOffState Iga 1 screen on/off state: 0x0!!!!
[ 4090.092319] S3CbiosSetMode
[ 4090.092321] ===========mode set info start=====================
[ 4090.092326] S3CbiosSetMode iga: 1 Source Mode=1024x768 32bpp
[ 4090.092331] S3CbiosSetMode device: 0x2 target Mode=1024x768 @6000 , Interlaced: 0
[ 4090.092335] S3CbiosSetMode ===========mode set info end=====================
[ 4090.092338]
[ 4090.092341] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.092355] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.092457] via_chrome_restore_previous_vsync mmio 200 old :0x800a0000
[ 4090.092461] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4090.092465] via_chrome9_crtc_do_set_base
[ 4090.092470] via_chrome9_crtc_do_set_base width=1280 height=1024 pitch=5120 bits_per_pixel=32 depth=24
[ 4090.092476] via_chrome9_crtc_do_set_base gpu_addr=c1000 , x=0 , y=0
[ 4090.092484] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 4090.092489] via_chrome9_crtc_do_set_base offset = 640, fetchcount=257, pixelformat=32
[ 4090.092494] S3CBiosSetIgaScreenOnOffState Iga 1 screen on/off state: 0x1!!!!
[ 4090.092563] via_chrome9_device_dpms DisplayDevice 0x2 dpms mode is 0x0.
[ 4090.092567] S3CbiosSetDisplayDevicePowerState Device: 0x2, screenState: 0x8
[ 4090.142222] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4090.142231] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4090.142240] via_vga_get_modes
[ 4090.142488] via_vga_mode_valid mode is not valid
[ 4090.142493] via_vga_mode_valid mode is not valid
[ 4090.143191] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4090.143198] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4090.143203] via_vga_get_modes
[ 4090.143398] via_vga_mode_valid mode is not valid
[ 4090.143402] via_vga_mode_valid mode is not valid
[ 4090.143483] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4090.143489] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4090.143498] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4090.143503] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4090.143716] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 4090.143723] via_chrome9_device_detect device 0x2 detect: 1 !
[ 4090.143728] via_chrome9_lcd_get_modes
[ 4090.143737] composite sync not supported
[ 4090.143752] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 4090.143758] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 4090.143764] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 4090.143769] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 4090.150067] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4090.150073] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4090.156120] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4090.156126] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4090.156141] via_chrome9_set_hdmi_xorg_options
[ 4090.156147] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 4090.156349] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4090.156356] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4090.156365] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4090.156370] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4090.162617] S3CBIOS: DP device HPD : 0
[ 4090.162624] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4090.162630] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4090.168854] S3CBIOS: DP device HPD : 0
[ 4090.168861] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4090.168867] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4090.169078] S3CBIOS: DP2 device HPD : 0
[ 4090.169085] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4090.169090] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4090.169099] S3CBIOS: DP2 device HPD : 0
[ 4090.169104] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4090.169110] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4090.175413] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4090.175419] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4090.181509] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4090.181515] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4090.185273] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4090.185282] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4090.185294] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4090.185300] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4090.185493] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4090.185499] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4090.185508] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4090.185514] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4090.191120] via_vga_mode_valid mode is not valid
[ 4090.191128] via_vga_mode_valid mode is not valid
[ 4090.238776] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 4090.238789] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 4090.238798] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 4090.238807] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 4090.238819] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 4090.238827] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4090.238832] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4090.238845] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4090.238862] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4090.238869] S3CbiosSetMode
[ 4090.238871] ===========mode set info start=====================
[ 4090.238877] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 4090.238883] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 4090.238888] S3CbiosSetMode ===========mode set info end=====================
[ 4090.238891]
[ 4090.238895] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.238914] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4090.239026] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4090.239032] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4090.239036] via_chrome9_crtc_do_set_base
[ 4090.239042] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 4090.239052] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[ 4090.239060] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 4090.239066] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 4090.239073] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4090.239131] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4090.239137] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4090.239142] S3CBIOS: Not error, CRT no Pad just return
[ 4091.039394] via_vga_mode_valid mode is not valid
[ 4091.039403] via_vga_mode_valid mode is not valid
[ 4091.148125] via_vga_mode_valid mode is not valid
[ 4091.148134] via_vga_mode_valid mode is not valid
[ 4098.698007] via_vga_mode_valid mode is not valid
[ 4098.698017] via_vga_mode_valid mode is not valid
[ 4099.278130] via_vga_mode_valid mode is not valid
[ 4099.278140] via_vga_mode_valid mode is not valid
[ 4100.166122] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4100.166132] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4100.166140] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4100.166146] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4100.172200] S3CBIOS: DP device HPD : 0
[ 4100.172206] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4100.172211] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4100.172217] S3CBIOS: DP2 device HPD : 0
[ 4100.172223] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4100.172228] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4100.178268] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4100.178273] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4115.289373] type=1400 audit(1334328290.707:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=10553 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4119.810970] via_vga_mode_valid mode is not valid
[ 4119.810981] via_vga_mode_valid mode is not valid
[ 4208.522747] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4208.756444] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4208.756453] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4208.756464] via_vga_get_modes
[ 4208.756712] via_vga_mode_valid mode is not valid
[ 4208.756716] via_vga_mode_valid mode is not valid
[ 4208.757409] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4208.757416] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4208.757421] via_vga_get_modes
[ 4208.757622] via_vga_mode_valid mode is not valid
[ 4208.757626] via_vga_mode_valid mode is not valid
[ 4208.757706] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4208.757712] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4208.757721] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4208.757727] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4208.757940] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 4208.757946] via_chrome9_device_detect device 0x2 detect: 1 !
[ 4208.757951] via_chrome9_lcd_get_modes
[ 4208.757961] composite sync not supported
[ 4208.757976] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 4208.757982] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 4208.757987] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 4208.757993] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 4208.764275] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4208.764282] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4208.770368] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4208.770374] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4208.770387] via_chrome9_set_hdmi_xorg_options
[ 4208.770392] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 4208.770596] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4208.770603] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4208.770612] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4208.770618] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4208.776876] S3CBIOS: DP device HPD : 0
[ 4208.776883] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4208.776888] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4208.782931] S3CBIOS: DP device HPD : 0
[ 4208.782937] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4208.782942] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4208.783142] S3CBIOS: DP2 device HPD : 0
[ 4208.783149] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4208.783155] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4208.783163] S3CBIOS: DP2 device HPD : 0
[ 4208.783169] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4208.783174] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4208.789439] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4208.789445] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4208.795551] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4208.795557] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4208.795778] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4208.795784] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4208.795794] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4208.795800] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4208.795991] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4208.795997] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4208.796031] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4208.796038] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4208.801371] via_vga_mode_valid mode is not valid
[ 4208.801379] via_vga_mode_valid mode is not valid
[ 4208.850079] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 4208.850092] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 4208.850102] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 4208.850111] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 4208.850122] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 4208.850130] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4208.850136] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4208.850149] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4208.850165] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4208.850172] S3CbiosSetMode
[ 4208.850174] ===========mode set info start=====================
[ 4208.850180] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 4208.850186] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 4208.850191] S3CbiosSetMode ===========mode set info end=====================
[ 4208.850194]
[ 4208.850199] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4208.850219] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4208.850338] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4208.850343] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4208.850348] via_chrome9_crtc_do_set_base
[ 4208.850354] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 4208.850364] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[ 4208.850373] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 4208.850379] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 4208.850386] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4208.850462] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4208.850467] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4208.850472] S3CBIOS: Not error, CRT no Pad just return
[ 4209.562060] via_vga_mode_valid mode is not valid
[ 4209.562071] via_vga_mode_valid mode is not valid
[ 4209.678191] via_vga_mode_valid mode is not valid
[ 4209.678201] via_vga_mode_valid mode is not valid
[ 4218.790093] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4218.790102] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4218.790111] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4218.790117] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4218.796157] S3CBIOS: DP device HPD : 0
[ 4218.796163] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4218.796169] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4218.796175] S3CBIOS: DP2 device HPD : 0
[ 4218.796180] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4218.796186] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4218.802220] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4218.802225] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4221.661752] via_vga_mode_valid mode is not valid
[ 4221.661762] via_vga_mode_valid mode is not valid
[ 4223.079679] via_vga_mode_valid mode is not valid
[ 4223.079691] via_vga_mode_valid mode is not valid
[ 4238.128272] type=1400 audit(1334328413.548:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=11071 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4242.898128] via_vga_mode_valid mode is not valid
[ 4242.898138] via_vga_mode_valid mode is not valid
[ 4276.762891] via_vga_mode_valid mode is not valid
[ 4276.762902] via_vga_mode_valid mode is not valid
[ 4298.100398] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4298.364383] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4298.364391] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4298.364403] via_vga_get_modes
[ 4298.364649] via_vga_mode_valid mode is not valid
[ 4298.364653] via_vga_mode_valid mode is not valid
[ 4298.365351] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4298.365358] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4298.365364] via_vga_get_modes
[ 4298.365560] via_vga_mode_valid mode is not valid
[ 4298.365564] via_vga_mode_valid mode is not valid
[ 4298.365646] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4298.365651] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4298.365660] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4298.365666] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4298.365879] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 4298.365886] via_chrome9_device_detect device 0x2 detect: 1 !
[ 4298.365891] via_chrome9_lcd_get_modes
[ 4298.365900] composite sync not supported
[ 4298.365915] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 4298.365921] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 4298.365926] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 4298.365932] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 4298.372260] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4298.372266] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4298.378370] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4298.378376] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4298.378388] via_chrome9_set_hdmi_xorg_options
[ 4298.378394] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 4298.378599] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4298.378605] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4298.378615] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4298.378620] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4298.384868] S3CBIOS: DP device HPD : 0
[ 4298.384875] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4298.384881] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4298.390929] S3CBIOS: DP device HPD : 0
[ 4298.390935] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4298.390940] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4298.391394] S3CBIOS: DP2 device HPD : 0
[ 4298.391401] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4298.391407] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4298.391416] S3CBIOS: DP2 device HPD : 0
[ 4298.391421] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4298.391427] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4298.397701] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4298.397708] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4298.403754] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4298.403760] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4298.404133] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4298.404140] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4298.404150] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4298.404155] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4298.404349] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4298.404355] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4298.404364] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4298.404370] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4298.409744] via_vga_mode_valid mode is not valid
[ 4298.409751] via_vga_mode_valid mode is not valid
[ 4298.456454] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 4298.456467] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 4298.456476] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 4298.456485] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 4298.456497] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 4298.456504] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4298.456510] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4298.456522] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4298.456538] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4298.456545] S3CbiosSetMode
[ 4298.456547] ===========mode set info start=====================
[ 4298.456553] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 4298.456559] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 4298.456564] S3CbiosSetMode ===========mode set info end=====================
[ 4298.456567]
[ 4298.456571] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4298.456589] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4298.456711] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4298.456716] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4298.456722] via_chrome9_crtc_do_set_base
[ 4298.456727] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 4298.456737] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[ 4298.456746] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 4298.456752] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 4298.456759] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4298.456821] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4298.456827] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4298.456832] S3CBIOS: Not error, CRT no Pad just return
[ 4299.156684] via_vga_mode_valid mode is not valid
[ 4299.156694] via_vga_mode_valid mode is not valid
[ 4299.276577] via_vga_mode_valid mode is not valid
[ 4299.276587] via_vga_mode_valid mode is not valid
[ 4308.390085] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4308.390095] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4308.390104] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4308.390110] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4308.396172] S3CBIOS: DP device HPD : 0
[ 4308.396178] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4308.396183] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4308.396189] S3CBIOS: DP2 device HPD : 0
[ 4308.396195] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4308.396200] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4308.402243] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4308.402249] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4309.514639] via_vga_mode_valid mode is not valid
[ 4309.514649] via_vga_mode_valid mode is not valid
[ 4309.794940] via_vga_mode_valid mode is not valid
[ 4309.794951] via_vga_mode_valid mode is not valid
[ 4310.244363] via_vga_mode_valid mode is not valid
[ 4310.244372] via_vga_mode_valid mode is not valid
[ 4325.924547] type=1400 audit(1334328501.344:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=11572 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4330.723916] via_vga_mode_valid mode is not valid
[ 4330.723926] via_vga_mode_valid mode is not valid
[ 4332.699260] via_vga_mode_valid mode is not valid
[ 4332.699270] via_vga_mode_valid mode is not valid
[ 4459.397440] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x003c)
[ 4459.397450] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0046)
[ 4459.397458] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x004b)
[ 4459.397466] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[ 4459.397474] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[ 4459.397484] S3CBIOS_mode_fixup Device:0x1 souce:1280x1024@8500 interlace:0, target:1280x1024@8500 interlace:0
[ 4459.397490] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4459.397495] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4459.397507] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4459.397521] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4459.397527] S3CbiosSetMode
[ 4459.397529] ===========mode set info start=====================
[ 4459.397534] S3CbiosSetMode iga: 0 Source Mode=1280x1024 32bpp
[ 4459.397540] S3CbiosSetMode device: 0x1 target Mode=1280x1024 @8500 , Interlaced: 0
[ 4459.397544] S3CbiosSetMode ===========mode set info end=====================
[ 4459.397547]
[ 4459.397550] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4459.397569] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4459.397681] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4459.397685] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4459.397689] via_chrome9_crtc_do_set_base
[ 4459.397694] via_chrome9_crtc_do_set_base width=1280 height=1024 pitch=5120 bits_per_pixel=32 depth=24
[ 4459.397702] via_chrome9_crtc_do_set_base gpu_addr=c1000 , x=0 , y=0
[ 4459.397709] via_chrome9_crtc_do_set_base mode hdisplay = 1280, mode vdisplay = 1024
[ 4459.397714] via_chrome9_crtc_do_set_base offset = 640, fetchcount=321, pixelformat=32
[ 4459.397721] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4459.397774] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4459.397778] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4459.397783] S3CBIOS: Not error, CRT no Pad just return
[ 4459.469890] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4459.469899] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4459.469908] via_vga_get_modes
[ 4459.470153] via_vga_mode_valid mode is not valid
[ 4459.470157] via_vga_mode_valid mode is not valid
[ 4459.470854] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 4459.470861] via_chrome9_device_detect device 0x1 detect: 1 !
[ 4459.470866] via_vga_get_modes
[ 4459.471075] via_vga_mode_valid mode is not valid
[ 4459.471079] via_vga_mode_valid mode is not valid
[ 4459.471160] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4459.471166] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4459.471175] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 4459.471180] via_chrome9_device_detect device 0x40 detect: 0 !
[ 4459.471393] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 4459.471399] via_chrome9_device_detect device 0x2 detect: 1 !
[ 4459.471405] via_chrome9_lcd_get_modes
[ 4459.471414] composite sync not supported
[ 4459.471429] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 4459.471436] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 4459.471441] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 4459.471446] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 4459.477707] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4459.477714] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4459.486085] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4459.486092] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4459.486108] via_chrome9_set_hdmi_xorg_options
[ 4459.486113] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 4459.486331] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4459.486339] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4459.486348] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4459.486354] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4459.492656] S3CBIOS: DP device HPD : 0
[ 4459.492663] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4459.492669] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4459.502225] S3CBIOS: DP device HPD : 0
[ 4459.502232] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4459.502238] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4459.502454] S3CBIOS: DP2 device HPD : 0
[ 4459.502461] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4459.502466] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4459.502475] S3CBIOS: DP2 device HPD : 0
[ 4459.502480] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4459.502486] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4459.508761] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4459.508768] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4459.514818] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4459.514823] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4459.515028] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4459.515034] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4459.515044] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 4459.515049] via_chrome9_device_detect device 0x100 detect: 0 !
[ 4459.515239] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4459.515245] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4459.515254] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 4459.515260] via_chrome9_device_detect device 0x10 detect: 0 !
[ 4459.520741] via_vga_mode_valid mode is not valid
[ 4459.520749] via_vga_mode_valid mode is not valid
[ 4459.571589] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 4459.571602] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 4459.571612] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 4459.571621] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 4459.571632] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 4459.571640] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 4459.571645] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 4459.571657] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 4459.571673] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 4459.571680] S3CbiosSetMode
[ 4459.571682] ===========mode set info start=====================
[ 4459.571688] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 4459.571694] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 4459.571699] S3CbiosSetMode ===========mode set info end=====================
[ 4459.571702]
[ 4459.571706] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4459.571725] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 4459.571842] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[ 4459.571848] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 4459.571852] via_chrome9_crtc_do_set_base
[ 4459.571858] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 4459.571868] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[ 4459.571877] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 4459.571883] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 4459.571890] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 4459.571970] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 4459.571975] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 4459.571980] S3CBIOS: Not error, CRT no Pad just return
[ 4460.530191] via_vga_mode_valid mode is not valid
[ 4460.530200] via_vga_mode_valid mode is not valid
[ 4460.659877] via_vga_mode_valid mode is not valid
[ 4460.659887] via_vga_mode_valid mode is not valid
[ 4469.478068] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 4469.478078] via_chrome9_device_detect device 0x200 detect: 0 !
[ 4469.478086] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 4469.478092] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 4469.484136] S3CBIOS: DP device HPD : 0
[ 4469.484142] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 4469.484148] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 4469.484154] S3CBIOS: DP2 device HPD : 0
[ 4469.484159] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 4469.484165] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 4469.490202] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 4469.490207] via_chrome9_device_detect device 0x20 detect: 0 !
[ 4472.979611] via_vga_mode_valid mode is not valid
[ 4472.979621] via_vga_mode_valid mode is not valid
[ 4473.280094] via_vga_mode_valid mode is not valid
[ 4473.280104] via_vga_mode_valid mode is not valid
[ 4489.659740] type=1400 audit(1334328665.077:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=12193 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4494.081929] via_vga_mode_valid mode is not valid
[ 4494.081939] via_vga_mode_valid mode is not valid
[ 4661.729366] tiger-demo[12981]: segfault at 1 ip b73cea14 sp bfa84040 error 4 in libc-2.15.so[b738b000+19e000]
[ 4684.279940] tiger-demo[12985]: segfault at 1 ip b732ca14 sp bfb1b4a0 error 4 in libc-2.15.so[b72e9000+19e000]
[ 4706.895787] tiger-demo[12989]: segfault at 1 ip b732aa14 sp bf811d10 error 4 in libc-2.15.so[b72e7000+19e000]
[ 5586.035710] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 5586.280516] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 5586.280524] via_chrome9_device_detect device 0x1 detect: 1 !
[ 5586.280535] via_vga_get_modes
[ 5586.280784] via_vga_mode_valid mode is not valid
[ 5586.280788] via_vga_mode_valid mode is not valid
[ 5586.281479] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[ 5586.281485] via_chrome9_device_detect device 0x1 detect: 1 !
[ 5586.281491] via_vga_get_modes
[ 5586.281698] via_vga_mode_valid mode is not valid
[ 5586.281703] via_vga_mode_valid mode is not valid
[ 5586.281782] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 5586.281787] via_chrome9_device_detect device 0x40 detect: 0 !
[ 5586.281796] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[ 5586.281802] via_chrome9_device_detect device 0x40 detect: 0 !
[ 5586.282015] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[ 5586.282021] via_chrome9_device_detect device 0x2 detect: 1 !
[ 5586.282027] via_chrome9_lcd_get_modes
[ 5586.282036] composite sync not supported
[ 5586.282052] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[ 5586.282057] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[ 5586.282063] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[ 5586.282069] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[ 5586.288343] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 5586.288349] via_chrome9_device_detect device 0x200 detect: 0 !
[ 5586.294417] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 5586.294423] via_chrome9_device_detect device 0x200 detect: 0 !
[ 5586.294443] via_chrome9_set_hdmi_xorg_options
[ 5586.294448] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[ 5586.294651] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 5586.294657] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 5586.294666] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 5586.294672] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 5586.300975] S3CBIOS: DP device HPD : 0
[ 5586.300983] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 5586.300989] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 5586.307031] S3CBIOS: DP device HPD : 0
[ 5586.307037] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 5586.307042] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 5586.307245] S3CBIOS: DP2 device HPD : 0
[ 5586.307252] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 5586.307258] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 5586.307266] S3CBIOS: DP2 device HPD : 0
[ 5586.307271] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 5586.307277] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 5586.313539] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 5586.313545] via_chrome9_device_detect device 0x20 detect: 0 !
[ 5586.319594] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 5586.319599] via_chrome9_device_detect device 0x20 detect: 0 !
[ 5586.319817] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 5586.319823] via_chrome9_device_detect device 0x100 detect: 0 !
[ 5586.319833] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[ 5586.319838] via_chrome9_device_detect device 0x100 detect: 0 !
[ 5586.320053] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 5586.320067] via_chrome9_device_detect device 0x10 detect: 0 !
[ 5586.320087] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[ 5586.320108] via_chrome9_device_detect device 0x10 detect: 0 !
[ 5586.325481] via_vga_mode_valid mode is not valid
[ 5586.325489] via_vga_mode_valid mode is not valid
[ 5586.371989] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[ 5586.372035] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[ 5586.372044] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[ 5586.372054] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[ 5586.372065] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[ 5586.372074] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[ 5586.372093] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[ 5586.372119] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[ 5586.372151] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[ 5586.372172] S3CbiosSetMode
[ 5586.372180] ===========mode set info start=====================
[ 5586.372197] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[ 5586.372216] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[ 5586.372235] S3CbiosSetMode ===========mode set info end=====================
[ 5586.372251]
[ 5586.372260] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 5586.372290] S3CBIOS: cbLoadTable_UMA: Loadtable called
[ 5586.372412] via_chrome_restore_previous_vsync mmio 200 old :0x800a0000
[ 5586.372431] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[ 5586.372450] via_chrome9_crtc_do_set_base
[ 5586.372465] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[ 5586.372493] via_chrome9_crtc_do_set_base gpu_addr=906000 , x=0 , y=0
[ 5586.372514] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[ 5586.372534] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[ 5586.372557] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[ 5586.372622] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[ 5586.372640] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[ 5586.372659] S3CBIOS: Not error, CRT no Pad just return
[ 5587.182859] via_vga_mode_valid mode is not valid
[ 5587.182869] via_vga_mode_valid mode is not valid
[ 5587.312995] via_vga_mode_valid mode is not valid
[ 5587.313004] via_vga_mode_valid mode is not valid
[ 5595.077618] via_vga_mode_valid mode is not valid
[ 5595.077628] via_vga_mode_valid mode is not valid
[ 5595.368165] via_vga_mode_valid mode is not valid
[ 5595.368174] via_vga_mode_valid mode is not valid
[ 5595.798745] via_vga_mode_valid mode is not valid
[ 5595.798755] via_vga_mode_valid mode is not valid
[ 5596.295902] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[ 5596.295912] via_chrome9_device_detect device 0x200 detect: 0 !
[ 5596.295921] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[ 5596.295927] via_chrome9_device_detect device 0x2000 detect: 0 !
[ 5596.301976] S3CBIOS: DP device HPD : 0
[ 5596.301983] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[ 5596.301989] via_chrome9_device_detect device 0x8000 detect: 0 !
[ 5596.301995] S3CBIOS: DP2 device HPD : 0
[ 5596.302001] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[ 5596.302006] via_chrome9_device_detect device 0x10000 detect: 0 !
[ 5596.308060] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[ 5596.308066] via_chrome9_device_detect device 0x20 detect: 0 !
[ 5610.929375] via_vga_mode_valid mode is not valid
[ 5610.929385] via_vga_mode_valid mode is not valid
[ 5610.937063] type=1400 audit(1334329786.358:29): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=13662 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5615.863437] via_vga_mode_valid mode is not valid
[ 5615.863447] via_vga_mode_valid mode is not valid
[ 7710.001338] via_vga_mode_valid mode is not valid
[ 7710.001348] via_vga_mode_valid mode is not valid
[18971.925797] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x003c)
[18971.925832] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0046)
[18971.925840] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x004b)
[18971.925848] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[18971.925856] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0500),VisScreenHeight(0x0400),Frequency(0x0055)
[18971.925865] S3CBIOS_mode_fixup Device:0x1 souce:1280x1024@8500 interlace:0, target:1280x1024@8500 interlace:0
[18971.925872] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[18971.925877] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[18971.925888] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[18971.925902] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[18971.925908] S3CbiosSetMode
[18971.925910] ===========mode set info start=====================
[18971.925915] S3CbiosSetMode iga: 0 Source Mode=1280x1024 32bpp
[18971.925920] S3CbiosSetMode device: 0x1 target Mode=1280x1024 @8500 , Interlaced: 0
[18971.925924] S3CbiosSetMode ===========mode set info end=====================
[18971.925927]
[18971.925931] S3CBIOS: cbLoadTable_UMA: Loadtable called
[18971.925949] S3CBIOS: cbLoadTable_UMA: Loadtable called
[18971.926060] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[18971.926065] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[18971.926069] via_chrome9_crtc_do_set_base
[18971.926074] via_chrome9_crtc_do_set_base width=1280 height=1024 pitch=5120 bits_per_pixel=32 depth=24
[18971.926082] via_chrome9_crtc_do_set_base gpu_addr=c1000 , x=0 , y=0
[18971.926090] via_chrome9_crtc_do_set_base mode hdisplay = 1280, mode vdisplay = 1024
[18971.926095] via_chrome9_crtc_do_set_base offset = 640, fetchcount=321, pixelformat=32
[18971.926101] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[18971.926158] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[18971.926162] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[18971.926167] S3CBIOS: Not error, CRT no Pad just return
[18983.334367] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[18983.334376] via_chrome9_device_detect device 0x1 detect: 1 !
[18983.334386] via_vga_get_modes
[18983.334618] via_vga_mode_valid mode is not valid
[18983.334622] via_vga_mode_valid mode is not valid
[18983.335317] S3CBiosDeviceDetect MbSupport:0x18223, device :0x1, connect: 0x1.
[18983.335324] via_chrome9_device_detect device 0x1 detect: 1 !
[18983.335330] via_vga_get_modes
[18983.335531] via_vga_mode_valid mode is not valid
[18983.335535] via_vga_mode_valid mode is not valid
[18983.335615] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[18983.335621] via_chrome9_device_detect device 0x40 detect: 0 !
[18983.335630] S3CBiosDeviceDetect MbSupport:0x18223, device :0x40, connect: 0x0.
[18983.335635] via_chrome9_device_detect device 0x40 detect: 0 !
[18983.335849] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2, connect: 0x1.
[18983.335855] via_chrome9_device_detect device 0x2 detect: 1 !
[18983.335861] via_chrome9_lcd_get_modes
[18983.335872] composite sync not supported
[18983.335887] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 59Hz
[18983.335893] is_vrefresh_near_to_60 mode 1024x768 refresh rate near to 60Hz
[18983.335899] is_vrefresh_near_to_60 mode 800x600 refresh rate near to 60Hz
[18983.335904] is_vrefresh_near_to_60 mode 640x480 refresh rate near to 60Hz
[18983.342594] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[18983.342601] via_chrome9_device_detect device 0x200 detect: 0 !
[18983.348645] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[18983.348650] via_chrome9_device_detect device 0x200 detect: 0 !
[18983.348666] via_chrome9_set_hdmi_xorg_options
[18983.348671] via_chrome9_set_hdmi_xorg_options via_hdmi_options->borders = 0, 0, 0, 0
[18983.348875] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[18983.348881] via_chrome9_device_detect device 0x2000 detect: 0 !
[18983.348890] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[18983.348896] via_chrome9_device_detect device 0x2000 detect: 0 !
[18983.355138] S3CBIOS: DP device HPD : 0
[18983.355145] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[18983.355151] via_chrome9_device_detect device 0x8000 detect: 0 !
[18983.361197] S3CBIOS: DP device HPD : 0
[18983.361203] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[18983.361208] via_chrome9_device_detect device 0x8000 detect: 0 !
[18983.361411] S3CBIOS: DP2 device HPD : 0
[18983.361418] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[18983.361423] via_chrome9_device_detect device 0x10000 detect: 0 !
[18983.361432] S3CBIOS: DP2 device HPD : 0
[18983.361437] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[18983.361443] via_chrome9_device_detect device 0x10000 detect: 0 !
[18983.367700] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[18983.367706] via_chrome9_device_detect device 0x20 detect: 0 !
[18983.373765] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[18983.373771] via_chrome9_device_detect device 0x20 detect: 0 !
[18983.373974] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[18983.373980] via_chrome9_device_detect device 0x100 detect: 0 !
[18983.373989] S3CBiosDeviceDetect MbSupport:0x18223, device :0x100, connect: 0x0.
[18983.373995] via_chrome9_device_detect device 0x100 detect: 0 !
[18983.374186] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[18983.374192] via_chrome9_device_detect device 0x10 detect: 0 !
[18983.374201] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10, connect: 0x0.
[18983.374206] via_chrome9_device_detect device 0x10 detect: 0 !
[18983.379527] via_vga_mode_valid mode is not valid
[18983.379535] via_vga_mode_valid mode is not valid
[18983.425844] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x003c)
[18983.425857] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0046)
[18983.425867] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x004b)
[18983.425876] S3CBiosExistModeAddTagetModeTolist PopulateTargetModeSet():The Target Mode we are going to add is:VisScreenWidth(0x0400),VisScreenHeight(0x0300),Frequency(0x0055)
[18983.425887] S3CBIOS_mode_fixup Device:0x1 souce:1024x768@9900 interlace:0, target:1024x768@6000 interlace:0
[18983.425895] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x3.
[18983.425901] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x4
[18983.425913] S3CBiosSetActiveDisplayDeviceConfiguration iga_path: 0x0, IGA1: 0x1, IGA2: 0x0
[18983.425929] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x0!!!!
[18983.425936] S3CbiosSetMode
[18983.425938] ===========mode set info start=====================
[18983.425944] S3CbiosSetMode iga: 0 Source Mode=1024x768 32bpp
[18983.425950] S3CbiosSetMode device: 0x1 target Mode=1024x768 @6000 , Interlaced: 0
[18983.425955] S3CbiosSetMode ===========mode set info end=====================
[18983.425958]
[18983.425963] S3CBIOS: cbLoadTable_UMA: Loadtable called
[18983.425981] S3CBIOS: cbLoadTable_UMA: Loadtable called
[18983.426093] via_chrome_restore_previous_vsync mmio 200 old :0x800a0002
[18983.426098] via_chrome_restore_previous_vsync mmio 200 restore use :0x800a0000
[18983.426104] via_chrome9_crtc_do_set_base
[18983.426109] via_chrome9_crtc_do_set_base width=1024 height=768 pitch=4096 bits_per_pixel=32 depth=24
[18983.426119] via_chrome9_crtc_do_set_base gpu_addr=5c1000 , x=0 , y=0
[18983.426127] via_chrome9_crtc_do_set_base mode hdisplay = 1024, mode vdisplay = 768
[18983.426133] via_chrome9_crtc_do_set_base offset = 512, fetchcount=257, pixelformat=32
[18983.426140] S3CBiosSetIgaScreenOnOffState Iga 0 screen on/off state: 0x1!!!!
[18983.426197] via_chrome9_device_dpms DisplayDevice 0x1 dpms mode is 0x0.
[18983.426202] S3CbiosSetDisplayDevicePowerState Device: 0x1, screenState: 0x8
[18983.426208] S3CBIOS: Not error, CRT no Pad just return
[18986.803760] via_vga_mode_valid mode is not valid
[18986.803770] via_vga_mode_valid mode is not valid
[18988.265088] via_vga_mode_valid mode is not valid
[18988.265099] via_vga_mode_valid mode is not valid
[18993.350094] S3CBiosDeviceDetect MbSupport:0x18223, device :0x200, connect: 0x0.
[18993.350104] via_chrome9_device_detect device 0x200 detect: 0 !
[18993.350112] S3CBiosDeviceDetect MbSupport:0x18223, device :0x2000, connect: 0x0.
[18993.350118] via_chrome9_device_detect device 0x2000 detect: 0 !
[18993.356157] S3CBIOS: DP device HPD : 0
[18993.356163] S3CBiosDeviceDetect MbSupport:0x18223, device :0x8000, connect: 0x0.
[18993.356169] via_chrome9_device_detect device 0x8000 detect: 0 !
[18993.356175] S3CBIOS: DP2 device HPD : 0
[18993.356181] S3CBiosDeviceDetect MbSupport:0x18223, device :0x10000, connect: 0x0.
[18993.356186] via_chrome9_device_detect device 0x10000 detect: 0 !
[18993.362223] S3CBiosDeviceDetect MbSupport:0x18223, device :0x20, connect: 0x0.
[18993.362229] via_chrome9_device_detect device 0x20 detect: 0 !
[18996.791736] via_vga_mode_valid mode is not valid
[18996.791746] via_vga_mode_valid mode is not valid
[18998.286074] via_vga_mode_valid mode is not valid
[18998.286085] via_vga_mode_valid mode is not valid
[18998.606493] via_vga_mode_valid mode is not valid
[18998.606503] via_vga_mode_valid mode is not valid
[19018.719638] via_vga_mode_valid mode is not valid
[19018.719648] via_vga_mode_valid mode is not valid